System Features

Profile System is comprised of three modular components that offer great customizability to meet your needs. Take control of large mixes easily with the 24-fader Profile console. Get scalable processing power with the FOH Rack. And connect mic and line-level stage sources to the Stage Rack for mixing.

SPECIFICATIONS

PROFILE CONSOLE SPECIFICATIONS

Maximum Height (front)  3.2 inches (81 mm)
Maximum Height (rear)  6.8 inches (169 mm)
Maximum Width  45.21 inches (1150 mm)
Maximum Depth  31.11 inches (790 mm)
Weight  90 lbs (40.8 kg)
Power Requirements  100–240 VAC, 50–60 Hz, 160 W
USB Ports (3)  USB 1.1
VGA Port  DB-15 mini-female (1024 x 768 resolution)
Footswitch Connectors (2)  1/4-inch TRS
GPI In Port  DB-25 D-Sub, female
GPI Out Port  DB-25 D-Sub, male
Console Light Connectors (2)  XLR
FOH Link Connector (to FOH Rack or Mix Rack)  MIL connector
Max FOH Link Cable Length  11 ft (3.35 m)

 

FOH RACK SPECIFICATIONS

Dimensions (H x W x D) 17.5 x 17.0 x 15.1 inches (445 x 432 x 384 mm) 
Rack Spaces  10 U
Weight  74 lbs (33.7 kg)
Power Requirements  90-260 VAC, 50-60 Hz, 220 W
Snake 1 In/Out Connectors (to Stage Rack)  BNC female (2)
Snake 2 In/Out Connectors (to Stage Rack)  BNC female (2)
Word Clock In/Out Connectors  BNC female (2)
USB Ports (2)  USB 2.0
FOH Link Connector (to D-Show Main Unit or Profile)  MIL connector
Mac FOH Link Cable Length  11 ft (3.35 m)

 

FOH Rack I/O (standard configuration)
COM INPUT  
Connector Neuetrik combi XLR/TRS
Phantom Power +15V @ 6mA (switchable on FOH Rack back panel)
Gain –2 dBu to –32 dBu, 6 steps
Input Impedance 20K ohms
ANALOG INPUTS 1–8; 2-TRACK ANALOG INPUTS
Connector 1/4-inch TRS
Maximum Input Level +24 dBu
Input Impedance 10K ohms
ANALOG OUTPUTS 1–8; 2-TRACK ANALOG OUTPUTS, MONITOR L/R
Connector 1/4-inch TRS
Maximum Input Level +24 dBu
Output Impedance 50 ohms
DIGITAL INPUTS (SWITCHABLE BETWEEN AES AND S/PDIF)
2-Track AES
Connector XLR3-F
Format AES/EBU
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion 3:1 ratio
2-Track S/PDIF
Connector RCA co-axial
Format S/PIDF (IEC-60958)
Word Length 24-bit
Sample Rate 48 kHz
Conversion 3:1 ratio
DIGITAL OUTPUTS (SWITCHABLE BETWEEN AES AND S/PDIF)
2-Track AES
Connector XLR3-M
Format AES/EBU
Word Length 24-bit
Sample Rate 48 kHz
Conversion Yes
Dithering None
Channel Status Info Pro, Audio 48K, No Emphasis
2-Track S/PDIF
Connector RCA coaxial
Format S/PIDF (IEC-60958)
Word Length 24-bit
Sample Rate 48 kHz
Sample Rate Conversion Yes
Dithering None
Channel Status Info Consumer, Audio, 48K, Non-copy, 2-Channel, General Category, Level 2 Clock

 

STAGE RACK SPECIFICATIONS

Dimensions (H x W x D)  17.5 x 17.0 x 12.2 inches (445 x 432 x 310 mm)
Rack Spaces 10 U 
I/O Card Slots 12 (6 input, 6 output) 
Weight  86 lbs (39 kg)
Power Requirements  90–260 VAC, 50–60 Hz, 140 W
Snake 1 In/Out Connectors (to FOH Rack)  BNC female (2)
Snake 2 In/Out Connectors (to FOH Rack)  BNC female (2)
Snake Cable Type  75-Ohm coaxial cable
Snake Cable Length  250 ft (76 m) with Belden 1855A or 500 ft (152 m) with Belden 1694A
PQ Link Connector (to PQ Rack)  XLR4-M
PQ Link Cable Type  110-Ohm (digital) cable
Max PQ Link Cable Length  15 ft (4.6 m)
Stage Rack I/O (standard configuration)
SRI ANALOG OUTPUT CARD (1)  
Connector (x8) XLR3-F